How to Hang Art on a Concrete Wall: A Practical Guide
Share
Table of Contents
- Identifying Your Concrete Wall and Artwork Weight
- How to Hang Art on a Concrete Wall Without Drilling
- Choosing Concrete Wall Picture Hangers and Fixings for Heavy Frames
- Hanging Pictures on Textured Concrete Walls and Next Steps
- Frequently Asked Questions
Last Updated: 3 November 2026
Identifying Your Concrete Wall and Artwork Weight
Hanging art on a concrete wall requires the right fixings, because concrete won't take a standard nail, and the wrong fixing can crack the surface or drop your frame. Before choosing a method, know your wall material and the weight of your piece.
Tapping the wall may offer a clue, but it cannot reliably identify the construction. A solid-sounding wall could be concrete, brick or block beneath plaster or render. Check building information or ask your landlord, building management or a qualified installer if you are unsure. Choose fixings for the underlying wall material, rather than the decorative surface alone.
Weigh the artwork including frame, glass and backing. Lightweight prints can often use adhesive hooks; heavier frames need masonry fixings. Check the weight of your chosen print size before buying hardware.
How to Hang Art on a Concrete Wall Without Drilling
If you rent, or simply want to avoid drilling, adhesive picture hooks are the simplest route. They suit small, light pieces only. Read the weight limit on the pack and never use them on heavy frames.

Adhesive picture hooks or strips may suit lightweight artwork on smooth, firmly painted surfaces, but only where the manufacturer lists that surface as suitable. Rough, dusty, unsealed or flaking concrete is unsuitable for many adhesive products.
Check the product’s weight limit and follow its instructions for cleaning, application and waiting time before hanging. Newly painted walls must be fully cured; follow both the paint manufacturer’s curing guidance and the adhesive manufacturer’s stated waiting period.
Removal methods also vary. Follow the instructions for your exact product rather than pulling the hook away from the wall. Even products described as removable can damage weak or poorly bonded paint. If the surface or artwork falls outside the product’s stated limits, choose an appropriate mechanical fixing or ask an installer.
Choosing Concrete Wall Picture Hangers and Fixings for Heavy Frames
For heavier frames, use masonry fixings. The right choice depends on the weight of the complete frame, the condition of the concrete surface, and whether the wall is solid concrete, brick, block or plaster over masonry.
Guide to Hanging on Masonry Walls
HouseCalls
Choose fixings rated for your wall material and the total weight of your artwork, including its frame, glazing and backing. Follow the fixing manufacturer’s installation instructions. For large or heavy pieces, or if you are unsure about the wall construction, use a qualified installer.
Match the plug and screw size to the frame's weight and the manufacturer's rating, and clear dust from the hole before inserting the plug.
Smooth, solid concrete takes standard masonry plugs well. Rough render or pebbledash can crumble, so drill slowly and consider a longer plug reaching the solid substrate. On brick, avoid mortar joints; for soft blockwork, use a plug designed for lightweight blocks.
Never use plastic plugs in cracked concrete or the loose surface layer of render, as the fixing can pull out under load. If the wall sounds hollow when tapped, stop and investigate before drilling.
If unsure, stop and check. Heavy frames can cause real damage when they fall.
Hanging Pictures on Textured Concrete Walls and Next Steps
Textured or rough concrete is harder to drill cleanly. Mark your spot with a pencil, cover it with painter's tape to stop the bit wandering, drill slowly and straight, and clear dust before inserting the plug.
Before drilling, check for concealed electrical cables, pipes and reinforcement. Consult available building plans and use a suitable detector according to its instructions; a clear detector reading does not guarantee the area is safe. If you cannot establish a safe drilling position, ask a qualified installer. Do not drill through reinforcement.
Drilling concrete can release fine silica dust. Use suitable on-tool dust extraction and follow the equipment’s dust-control instructions. Wear eye protection and any respiratory protection specified for the work. If you do not have the appropriate equipment, use a qualified installer.
Once the fixing is in, hang the frame and check it is level. If a hole is wrong, fill it, let it dry, then sand smooth before repainting.
For more layout ideas, read our guide on planning a gallery wall before you commit to fixings.
Start by checking the weight of your frame, then choose a fixing rated for that load. Lightweight artwork may suit adhesive products approved for the surface. Heavier frames generally need mechanical fixings suitable for the wall material, such as a masonry wall plug paired with a compatible screw or picture hook. Follow the fixing manufacturer’s instructions for the drill bit, hole depth, hole cleaning and installation. Command™ products are not suitable for every concrete surface. Check the exact product’s packaging to confirm whether your wall finish is supported. Rough, dusty, unsealed or flaking concrete is unsuitable for many adhesive products. Follow the stated weight limit, surface preparation, application and waiting times. For unsupported surfaces or artwork exceeding the product’s limits, use suitable mechanical fixings or consult an installer. Use a masonry drill bit, a hammer drill and wall plugs rated for the weight of the frame. Mark the hole positions with a level, drill to the diameter and depth specified by the fixing manufacturer, clear the dust with a brush, and tap the plug in flush. Fit the compatible screw or picture hook into the plug as instructed by the manufacturer, ensuring it securely engages with the frame’s hanging hardware.Frequently Asked Questions
How can I hang artwork on a concrete wall?
Will Command strips hold on concrete?
How do I hang a heavy picture on a concrete wall?
Once your wall and fixings are sorted, your artwork can stay put for years. Explore the Your Urban Canvas collection and find a city print that suits your space.